mmsz4681-v to mmsz4717-v www.vishay.com vishay semiconductors rev. 1.8, 29-nov-11 1 document number: 85773 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal zener diodes features ? silicon planar zener diodes ? standard zener voltage tolerance is 5 % ? high temperature soldering guaranteed: 260 c/4 x 10 s set terminals ? these diodes are also available in do-35 case with the type designation 1n4681 to 1n4717, and sot-23 case with type designation mmbz4681-v to mmbz4717-v ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec primary characteristics parameter value unit v z range nom. 2.4 to 43 v test current i zt 0.05 ma v z specification thermal equilibrium int. construction single ordering information device name ordering code taped units per reel minimum order quantity mmsz4681-v to mmsz4717-v mmsz4681-v to mmsz4717-v-series-gs18 10 000 (8 mm tape on 13" reel) 10 000/box mmsz4681-v to mmsz4717-v mmsz4681-v to mmsz4717-v-series-gs08 3000 (8 mm tape on 7" reel) 15 000/box package package name weight molding compound flammability rating moisture sensitivity level soldering conditions sod-123 10.3 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit power dissipation t l = 75 c, on fr - 4 or fr - 5 board with minimum recommended solder pad layou p tot 500 mw zener current see table characteristics junction to ambient air on fr - 4 or fr - 5 board with minimum recommended solder pad layou r thja 340 k/w junction temperature t j 150 c storage temperature range t stg - 55 to + 150 c
mmsz4681-v to mmsz4717-v www.vishay.com vishay semiconductors rev. 1.8, 29-nov-11 2 document number: 85773 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ?maximum v f = 0.9 v at i f = 10 ma (1) measured with device juncti on in thermal equilibrium electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range (1) test current reverse current v z at i zt1 i zt1 i r at v r v ma a v min. nom. max. max. mmsz4681-v cf 2.28 2.4 2.52 0.05 2 1 mmsz4682-v ch 2.57 2.7 2.84 0.05 1 1 mmsz4683-v cj 2.85 3 3.15 0.05 0.8 1 mmsz4684-v ck 3.14 3.3 3.47 0.05 7.5 1.5 mmsz4685-v cm 3.42 3.6 3.78 0.05 7.5 2 mmsz4686-v cn 3.71 3.9 4.1 0.05 5 2 mmsz4687-v cp 4.09 4.3 4.52 0.05 4 2 mmsz4688-v ct 4.47 4.7 4.94 0.05 10 3 mmsz4689-v cu 4.85 5.1 5.36 0.05 10 3 mmsz4690-v cv 5.32 5.6 5.88 0.05 10 4 mmsz4691-v ca 5.89 6.2 6.51 0.05 10 5 mmsz4692-v cx 6.46 6.8 7.14 0.05 10 5.1 mmsz4693-v cy 7.13 7.5 7.88 0.05 10 5.7 mmsz4694-v cz 7.79 8.2 8.61 0.05 1 6.2 mmsz4695-v dc 8.27 8.7 9.14 0.05 1 6.6 mmsz4696-v dd 8.65 9.1 9.56 0.05 1 6.9 mmsz4697-v de 9.5 10 10.5 0.05 1 7.6 mmsz4698-v df 10.5 11 11.6 0.05 0.05 8.4 mmsz4699-v dh 11.4 12 12.6 0.05 0.05 9.1 mmsz4700-v dj 12.4 13 13.7 0.05 0.05 9.8 mmsz4701-v dk 13.3 14 14.7 0.05 0.05 10.6 mmsz4702-v dm 14.3 15 15.8 0.05 0.05 11.4 mmsz4703-v dn 15.2 16 16.8 0.05 0.05 12.1 mmsz4704-v dp 16.2 17 17.9 0.05 0.05 12.9 mmsz4705-v dt 17.1 18 18.9 0.05 0.05 13.6 mmsz4706-v du 18.1 19 20 0.05 0.05 14.4 mmsz4707-v dv 19 20 21 0.05 0.01 15.2 mmsz4708-v da 20.9 22 23.1 0.05 0.01 16.7 mmsz4709-v dz 22.8 24 25.2 0.05 0.01 18.2 mmsz4710-v dy 23.8 25 26.3 0.05 0.01 19 mmsz4711-v ea 25.7 27 28.4 0.05 0.01 20.4 mmsz4712-v ec 26.6 28 29.4 0.05 0.01 21.2 mmsz4713-v ed 28.5 30 31.5 0.05 0.01 22.8 mmsz4714-v ee 31.4 33 34.7 0.05 0.01 25 mmsz4715-v ef 34.2 36 37.8 0.05 0.01 27.3 mmsz4716-v eh 37.1 39 41 0.05 0.01 29.6 mmsz4717-v ej 40.9 43 45.2 0.05 0.01 32.6
mmsz4681-v to mmsz4717-v www.vishay.com vishay semiconductors rev. 1.8, 29-nov-11 3 document number: 85773 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - total power dissipation vs. ambient temperature fig. 2 - typical change of working voltage under operating conditions at t amb = 25 c fig. 3 - typical change of working voltage vs. junction temperature fig. 4 - temperature coefficient of v z vs. z-voltage fig. 5 - forward current vs. forward voltage fig. 6 - z-current vs. z-voltage 0 100 200 300 400 500 600 0 20 40 60 80 100 120 140 160 t am b - am b ient temperat u re (c) p tot - total po w er dissipation (mw) 20850 10 15 20 1 10 100 1000 v z - v oltage change (m v ) v z - z- v oltage ( v ) 25 95 9598 t j = 25 c i z = 5 ma 0 5 - 60 60 120 180 0.8 0.9 1.0 1.1 1.2 1.3 v ztn - relative voltage change t j - junction temperature (c) 240 95 9599 0 v ztn = v zt /v z (25 c) 0 tk vz = 10 x 10 -4 /k 8 x 10 -4 /k 2 x 10 -4 /k 6 x 10 -4 /k 4 x 10 -4 /k - 4 x 10 -4 /k - 2 x 10 -4 /k - 5 0 5 10 15 v z - z- v oltage ( v ) 95 9600 i z = 5 ma 0 10 203040 50 tk v z - temperat u re coefficient of v z (10 -4 /k) 0 0.2 0.4 0.6 0.8 0.001 0.01 0.1 1 10 100 1.0 95 9605 i f - for w ard c u rrent (ma) v f - for w ard v oltage ( v ) t j = 25 c 8 20 95 9604 0 20 40 60 80 100 i z - z-c u rrent (ma) p tot = 500 mw t am b = 25 c 046 12 v z - z- v oltage ( v )
mmsz4681-v to mmsz4717-v www.vishay.com vishay semiconductors rev. 1.8, 29-nov-11 4 document number: 85773 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - z-current vs. z-voltage fig. 8 - differential z-resistance vs. z-voltage package dimensions in millimeters (inches): sod-123 15 20 25 30 0 10 20 30 40 50 i z - z-c u rrent (ma) v z - z- v oltage ( v ) 35 95 9607 p tot = 500 mw t am b = 25 c 0 101520 1 10 100 1000 25 95 9606 t j = 25 c i z = 1 ma 5 ma 10 ma v z - z- v oltage ( v ) r z - differential z-resistance ( ) 5 0.1 (0.004) max. 2.85 (0.112) 2.55 (0.100) 3.85 (0.152) 3.55 (0.140) 1.7 (0.067) 1.40 (0.055) mo u nting pad layo u t 2.5 (0.098) 0.85 (0.033) 0.85 (0.033) 0.85 (0.033) cathode b ar 0.65 (0.026) 0.45 (0.018) 0.10 (0.004) 1 (0.039) 0.15 (0.006) 1.35 (0.053) 0.2 (0.008) 0 to 8 0.45 (0.018) 0.25 (0.010) 0.5 (0.020) ref. re v . 4 - date: 24. sep. 2009 doc u ment no.: s8- v -3910.01-001 (4) 17432
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
